Cisco Certified Network Associate in Routing and Switching

✅Welcome to the course
✅About CCNA 200-301 Exam
✅About Course Syllabus
✅About My Experience
✅Recommended Software & Installation
✅About the Career Opportunities

✅What is a network?
✅Types of Networks
✅A bit of Networking History
✅Servers, Clients, Ports and Protocols
✅Networking Devices: Repeaters, Hubs, Switches and Routers
✅Networking Devices: Firewalls, IDS, IPS and WLC

✅Need for a reference Model in Networking
✅Overview of 7 layers in OSI Model
✅Transport Layer & its functions in detail
✅Network Layer & its functions in detail
✅Comparison between OSI & TCP/IP Model

✅Introduction
✅The Transport Layer
✅TCP and UDP

✅Introduction
✅IP Header
✅Unicast, Broadcast and Multicast
✅IPv4 addresses
✅The Subnet Mask
✅CIDR Notation

✅Introduction
✅Class A IP addresses
✅Class B IP addresses
✅Class C IP addresses
✅Class D & E addresses

✅Introduction
✅Flexible Length Subnet Masking
✅Subnet Calculation
✅Online Subnet Calculator

✅CIDR Classless Inter-Domain Routing
✅Subnetting Class C Networks and VLSM
✅Subnetting Large Networks
✅Subnetting Table and Subnet Calculator

✅Introduction
✅Switches and Hubs
✅Switch Operation
✅Routers
✅Other Cisco devices
✅Cisco device functions

✅Introduction
✅DNS Domain Naming System
✅DNS and CISCO Routers
✅ARP and Address Resolution
✅HTTP Request
✅DNS Request

✅Introduction
✅Router and Switch initial configuration
✅Speed and Duplex settings
✅CDP and LLDP

✅Introduction
✅Connected and Local Routes
✅Static Route
✅Summarization
✅Routing fundamental lab

✅Introduction
✅Dynamic Routing Protocols Vs Static Routes
✅Dynamic Routing Protocol Lab
✅Routing Protocol Types
✅Routing Protocol Metrics
✅Administrative Distance
✅Equal Cost Multi Path

✅Introduction
✅RIP - Routing Information Protocol
✅EIGRP - Enhanced Interior Gateway Routing Protocol
✅IGP- Interior Gateway Protocol

✅Introduction
✅OSPF Characteristics
✅OSPF Basic Configuration
✅OSPF Area
✅OSPF Cost Metrics
✅OSPF DR and BDR
✅OSPF Configuration

✅Introduction
✅Campus LAN design
✅Spin Leaf Network design
✅VLAN Access Ports
✅VLAN Trunk Ports
✅DTP
✅VTP
✅VTP Lab demo

✅Introduction
✅Router with Separate Interfaces
✅Router on a Stick
✅Layer 3 Switch
✅VLAN and Inter-VLAN Routing Configuration

✅Introduction
✅Dynamic Host Configuration Protocol
✅CISCO DHCP server
✅External DHCP Server
✅Windows and Linux Client IP Settings
✅CISCO DHCP Client
✅DHCP Configuration LAB

✅Introduction
✅Network Redundancy
✅FHRP First Hop Redundancy Protocol
✅HSRP Hot Standby Router Protocol
✅HSRP Configuration

✅Introduction
✅Layer 3 Path selection and loop prevention
✅Why we have spanning tree protocol
✅Spanning Tree Versions
✅Verification of STP
✅Manipulating Root Bridge Selection
✅Spanning Tree and HSRP alignment
✅PortFast, BPDU Guard and Root Guard
✅STP Configuration

✅Introduction
✅Why we have EtherChannel
✅EtherChannel Load Balancing
✅EtherChannel Protocol and Configuration
✅EtherChannel Demo
✅StackWise, VSS and vPC
✅Layer 3 EtherChannel
✅Ether Channel Configuration

✅Introduction
✅DHCP Snooping
✅DAI Dynamic ARP Inspection
✅802.1X Identity Based Networking
✅Preventing Unauthorized Devices with Port Security
✅Locking Ports to Hosts with Port Security
✅Port Security Configuration Lab

✅Introduction
✅Access Control Lists
✅Standard, Extended and Named Access List
✅ACL Syntax and Operations
✅ACL Labs

✅Introduction
✅IPv4 Exhaustion and NAT
✅Static NAT
✅NAT Translations - Inside Local, Inside Global, Outside Local, Outside Global
✅Dynamic NAT
✅Port Address Translation
✅Network Address Translation Configuration

✅Introduction
✅WAN Overview
✅VPN Virtual Private Network
✅WAN Connectivity Options
✅Leased Lines
✅MPLS Multi Protocol Label Switching